This following estimator is for use on
commercial - residential applications only (not for
automobiles) and may, at first, seem a bit confusing however, it's
really very easy to use. First you'll need to measure your windows
and have those measurements on hand before starting this. It's best
to enter your measurements in "inches" for better accuracy and
that's also how we'd do it. We have provided a "feet" option for
those just wanting to blow through with out-of -their-head
guestimates to satisfy an immediate curiosity.
What to do
Once running the Flat Glass Self Estimator you'll just basically:
Pick your desired film type to be used.
Answer a few questions by clicking an option button next to it.
Select weather or not you'll be entering your measurements in
"inches" or "feet" (make sure you get this right).
Entering in the quantity of windows and your measurements
(width and height) for each round needed.
Click the "Get An Estimate Button" to get a calculated quote on the
resulting page.
You can then click the "Next Round" button on the resulting page to
enter another group of window measurments to add to your total and
repeat this process over as needed until you hit the final ROUND 5
page.
ROUNDS 1 through 5 for different
scenarios
It does 1 through 5 ROUNDS for different scenarios you might have
such as a one group of windows that have blinds or drapes needing to
be removed / re-installed and another group of windows that doesn't
and another group that meets other criteria found there and so
on....Just keep your window scenarios grouped together per ROUND for
a more accurate quote. You'll understand this more as you start the
Flat Glass Self Estimator, just remember this statement.
How it works
All your entered information will reside in our memory (not
yours) for 2 hours before self deleting. The price per square foot
will be calculated based on the TOTAL square feet amount from ALL
rounds combined plus any added variable costs. We will see none of
it unless you select and the complete "email it to us" option
located at the bottom of each Round's resulting page. This is so you
can go nuts with it as much as you need to to try different ways of
input if needed. Just remember, DO NOT use your browser's BACK
BUTTON to go back and re-enter or correct any previously entered
information for this will produce erroneous miscalculations and be
just a big old waste of time. If needed, you'll have to use the
provided "Clear Memory" buttons to clear out all entered input from
our memory and this will start you completely over.
Send us your calculated results
Once you have completed all your needed rounds and have achieved a
calculated quote, you'll have the option to send your input to us by
email for further review. If you do complete the email form, all
your calculated input will come to us for review and you'll get an
automated copy emailed to you as well..... Then we should be able to
respond to you within 24 to 48 hours (depending on the seasonal
pressures of demand).
Our base pricing starts out as follows:
$5.00 per sq.
ft. over a total of 400 sq. ft.
plus any variable(s) cost.
$6.00 per sq. ft. between 100
and 400 sq. ft. plus any variable(s) cost.
$7.50 per sq. ft. between 25 and
100 sq. ft. plus any variable(s) cost.
$12.00 per sq. ft. less than a total of
25 sq. ft. plus any variable(s) cost.
Go man (or person), go.....
That's it, just follow any further instructions the Flat Glass Self
Estimator presents to you and you'll be on your way to getting and
estimate from us. You can now proceed to getting an online quote
from us. |